Before every uninterruptible power supply (UPS system) shipment leaves the Cetronic warehouse, where possible, we charge the batteries, put the UPS system through a load test, check the manual bypass and static bypasses are working, as well as doing a battery test. This is done to make sure the UPS system is functioning correctly, before shipping the unit to you.
If any accessories have been ordered with the UPS System, such as an SNMP card, we will check that the accessory is communicating with the UPS System properly, usually through computer software.
We are able to modify UPS systems to suit your need. For example, on our smaller range of UPS systems, which typically have an IEC plug socket, we can modify these to have hardwired input and output terminals. Generally, to do this we would mount a plastic box on the back of the unit, and fit terminals inside the plastic box for the input and output. We would then do thorough tests to make sure the connections are safe and working.